ULTRALOQ Bolt SE Smart Lock Instruction Manual

1. Танилцуулга

The ULTRALOQ Bolt SE Smart Lock offers advanced security and convenience for your home. This deadbolt features multiple access methods, including fingerprint ID, passcodes, smartphone app control, and traditional mechanical keys. With built-in Wi-Fi and Matter over Thread compatibility, it seamlessly integrates into various smart home ecosystems, providing remote control and automation capabilities.

2. Аюулгүй байдлын мэдээлэл

Суулгах, ашиглахаасаа өмнө бүх зааврыг анхааралтай уншина уу. Энэ гарын авлагыг цаашид лавлах зорилгоор хадгална уу.

• Суулгахад цахилгаан өрөм ашиглаж болохгүй.
• Түгжигдэхээс зайлсхийхийн тулд хаалгыг онгорхой байхад нь суулгаж, туршина.
• Түгжээг суулгахаасаа өмнө батерейг бүү суулгаарай.
• Зааврыг дарааллаар нь дагана уу.
• This lock is designed for specific operating temperatures:
• Outside Lock Body: -31°F (-35°C) to 158°F (70°C)
• Дотор түгжээний их бие: 14 ° F (-10 ° C) -аас 131 ° F (55 ° C)

3. Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгаарай:

• ULTRALOQ Bolt SE Smart Wi-Fi Deadbolt (Exterior Assembly)
• Дотоод угсралт
• Хамгаалалтын түгжээ
• Суурилуулах хавтан
• Ажил хаялтын хавтан
• 2 Механик түлхүүр
• Installation Kit (screws, screwdriver, reset needle)
• Хэрэглэгчийн гарын авлага

4. Техникийн үзүүлэлтүүд

5. Тохиргоо & Суурилуулалт

5.1 Суурилуулалтын өмнөх шалгалт

Before starting, ensure your door meets the following requirements:

• Хаалганы зузаан: 1 3/8" to 2 1/4" (35mm to 57mm)
• Нуруу: 2 3/8" эсвэл 2 3/4"
• Hole in Door Face: 2 1/8" diameter
• Hole in Door Edge: 1 инчийн диаметртэй

Image: Diagram illustrating the required door thickness, backset, and hole diameters for proper installation of the ULTRALOQ Bolt SE Smart Lock.

5.2 Механик суурилуулалт

1. Хамгаалалтын түгжээг тохируулна уу: If necessary, adjust the deadbolt latch to match your door's backset (60mm or 70mm). Rotate the bolt to extend or shorten it. Ensure the word "TOP" on the latch faces upward.
2. Deadbolt түгжээг суулгана уу: Insert the adjusted deadbolt latch into the door edge. Secure it with the provided screws from the accessory kit.
3. Гадна угсралтыг суурилуулах: Ensure the cylinder tailpiece is horizontal. Route the cable from the exterior assembly through the hole below the bolt. Carefully align the exterior assembly with the deadbolt latch and press it onto the door.
4. Install the Interior Assembly Mounting Plate: Route the cable through the bottom hole of the mounting plate. Align the mounting plate with the exterior assembly and secure it using the appropriate screws (Screws D) for your door thickness.
5. Connect the Interior Assembly: Connect the cable from the exterior assembly to the socket on the interior assembly. Ensure the concave and convex sides are aligned and press firmly until it clicks.
6. Дотоод угсралтыг суурилуулах: Place the interior assembly over the mounting plate, ensuring the tailpiece aligns with the knob. Secure it with the provided screws (Screws E).

5.3 Initial Setup & Calibration

1. Батерейг суулгах: Insert 4 AA batteries into the interior assembly. Ensure correct polarity. Close the battery cover.
2. Perform Direction Calibration: Keep the bolt in the unlocked position. Press and hold the "5" button on the keypad for 3 seconds. The lock will automatically run the door-handling process, confirming the correct orientation.
3. App Pairing (Wi-Fi Mode):
   • Таны утсан дээр Bluetooth идэвхжсэн эсэхийг шалгаарай.
   • Press any button on the front panel to activate Bluetooth. Start setup within 30 seconds.
   • Open the U Home app, select "Add Device" and choose "Locks".
   • Follow the on-screen prompts to pair your Bolt SE. You will need to enter the 6-digit Program Code found under the battery cover.
   • Connect to your 2.4GHz Wi-Fi network (5GHz Wi-Fi is not supported).
4. App Pairing (Matter Mode):
   • If already set up in U Home app, switch to Matter Mode via settings.
   • Ensure you have a Matter-over-Thread-compatible smart gateway fully set up and connected to the same Wi-Fi network as your phone.
   • Insert a pin into the reset hole and hold for 3 seconds to enable Thread.
   • In your preferred smart home app (e.g., Alexa, Apple Home), select "Add Device" and choose the Matter option.
   • Scan the QR code inside the battery cover or enter the 11-digit numeric code.

6. Ашиглалтын заавар

6.1 Unlocking & Locking

• Хурууны хээ ID: Place your registered finger on the fingerprint sensor for quick unlocking. The lock features 360° live fingerprint ID with 0.3s unlock speed and 99.8% accuracy.
• Товчлуур: Enter your 4-8 digit passcode on the tactile keypad. The keypad is glove-friendly and fingerprint-resistant.
• Ухаалаг гар утасны програм: Use the U Home app to remotely lock or unlock your door from anywhere.
• Дуут удирдлага: Integrate with Apple Home, Alexa, or Google Assistant to lock/unlock your door using voice commands.
• Механик түлхүүр: Two traditional mechanical keys are provided for backup access. The keyhole is discreetly located under a rubber pad on the exterior assembly.

Image: A hand placing a finger on the fingerprint sensor of the ULTRALOQ Bolt SE Smart Lock, indicating a successful unlock.

Image: Close-up of the tactile keypad on the ULTRALOQ Bolt SE Smart Lock, showing the numbered buttons.

6.2 User Management & Access Sharing

Through the U Home app or web портал, та:

• Manage up to 50 access codes.
• Share eKeys or codes remotely for permanent, specific dates, or periods of time.
• View lock history and receive real-time notifications.

6.3 Автоматаар түгжих функц

Set a preset timer for auto-lock (e.g., 10-180 seconds) or press the "ULTRALOQ" button to lock instantly. This feature ensures your door is always secured.

6.4 Remote Control & Smart Home Integration

The ULTRALOQ Bolt SE offers seamless integration with various smart home platforms:

• Wi-Fi горим: Control via U Home app, Amazon Alexa, Google Home.
• Материйн горим: Control via Apple Home, Amazon Alexa, Google Assistant, Samsung SmartThings, Home Assistant (requires a Matter Over Thread hub controller).

7. Засвар үйлчилгээ

7.1 Батерейг солих

The ULTRALOQ Bolt SE uses 4 AA batteries, offering up to 18 months of battery life thanks to Thread's low-energy mesh network. The lock will provide real-time low battery alerts.

• When the battery is low, replace all 4 AA batteries promptly.
• To replace, remove the interior assembly cover, replace the batteries, and reattach the cover.

Image: The interior assembly of the ULTRALOQ Bolt SE Smart Lock with the battery cover removed, showing the 4 AA battery slots.

7.2 Цэвэрлэгээ

Цоожны гадна талыг зөөлөн, d-ээр арчинаamp даавуу. Өнгөлгөө болон электрон эд ангиудыг гэмтээж болох зүлгүүрийн цэвэрлэгч, уусгагчаас зайлсхий.

8. Алдаа засах

• Lock not responding / Green light not coming on: Check battery levels and replace if necessary. Ensure batteries are inserted correctly. If issues persist, try removing and reinserting one battery to reset the unit.
• Хурууны хээ танигдаагүй: Ensure your finger is clean and dry. Try re-registering your fingerprint in the app. Ensure the sensor is clean.
• "Lock jammed" error: This can occur if the deadbolt does not fully extend or retract. Check for obstructions in the door frame. Ensure the hole in the door frame has at least 1" depth. Loosen mounting screws slightly if they are too tight, as this can impede bolt movement.
• Connectivity issues (Wi-Fi/Matter): Ensure your Wi-Fi network is 2.4GHz. Verify your Matter-enabled hub is properly set up and connected to the same network. If the lock loses connection, try restarting the device or re-pairing through the app.
• Алсын түгжээг тайлах ажиллахгүй байна: Confirm the lock has a stable internet connection (for Wi-Fi mode) or is properly connected to your Matter hub. Check app settings for remote unlock permissions.
• Товчлуур хариу өгөхгүй байна: Ensure the keypad is clean. If the keypad is completely unresponsive, check battery levels.
• Механик түлхүүр ажиллахгүй байна: Ensure the key is fully inserted and turned correctly. If the keyhole cover is stuck, gently pry it open.

9. Баталгаат хугацаа ба дэмжлэг

ULTRALOQ provides the following warranty coverage for the Bolt SE Smart Lock:

• Lifetime Mechanical Coverage
• 18-Month Electronic Protection

Хэрэглэгчийн дэмжлэг авахыг хүсвэл дараах хаягаар холбогдоно уу.

• Утасны дэмжлэг: Monday–Friday, 7 AM–6 PM PST
• Имэйл үйлчилгээ: 24/7 after-sales email support