1. Танилцуулга
The Mecpow P50 Fume Extractor is designed to provide a cleaner and safer working environment by effectively removing smoke, dust, and harmful particles generated during various processes, such as laser engraving and soldering. This manual provides essential information for the proper setup, operation, and maintenance of your P50 Fume Extractor.
2. Аюулгүй ажиллагааны заавар
Төхөөрөмжийг ажиллуулахаасаа өмнө бүх аюулгүй байдлын зааврыг анхааралтай уншина уу. Эдгээр зааврыг дагаж мөрдөөгүй тохиолдолд гэмтэл бэртэл авах эсвэл бүтээгдэхүүнд эвдрэл учруулж болзошгүй.
- Цахилгаан хангамж нь төхөөрөмжийн үзүүлэлтүүдтэй тохирч байгаа эсэхийг шалгаарай.
- Do not operate the fume extractor in wet conditions or near flammable liquids or gases.
- Агаарын урсгалыг хэвийн байлгахын тулд агаарын оролт болон гаралтын хэсгийг бөглөрөлгүй байлга.
- Regularly inspect the power cord for damage. Do not use if the cord is damaged.
- Төхөөрөмжийг өөрөө задлах эсвэл засах гэж бүү оролдоорой. Тусламж авахын тулд мэргэшсэн үйлчилгээний ажилтантай холбогдоно уу.
- Хамгийн оновчтой гүйцэтгэл болон агаарын чанарыг хадгалахын тулд шүүлтүүрийг зөвлөмжийн дагуу солино уу.
- Хүүхдийн гар хүрэхгүй газар хадгална.
3. Бүтээгдэхүүн дууссанview
3.1 Гол онцлогууд
- Хүчтэй сорох: Equipped with a 50W brushless motor, providing 128m³/h airflow for instant smoke and particle capture.
- 3 давхар шүүлтүүрийн систем: Includes a pre-filter, medium HEPA filter, and activated carbon filter for 99.97% purification efficiency.
- Битүүмжилсэн дизайн: Integrated sealed design with precision-fit air inlet and protective foam to prevent smoke leakage.
- 3 хурдны горим: Adjustable low, medium, and high-speed settings for various tasks.
- Чимээгүй ажиллагаа: Operates at a noise level under 55 dB.
- Өргөн нийцтэй байдал: Compatible with Mecpow M1, Atomstack P1, and other laser engravers with a Φ50 mm flange.
3.2 Бүрэлдэхүүн хэсэг
The Mecpow P50 Fume Extractor consists of the main unit, a flexible exhaust hose, and a power cable. The internal filtration system comprises three distinct layers.
Figure 3.2.1: Mecpow P50 Fume Extractor with exhaust hose. This image shows the complete fume extractor unit, including the main body and the flexible exhaust hose connected to the top.
Зураг 3.2.2: Нарийвчилсан view of the 3-Layer Filtration System. This diagram illustrates the three filter layers: (1) Pre-Filter for large particles, (2) Medium HEPA Filter for fine particles, and (3) Activated Carbon Filter for harmful gases and odors.
Figure 3.2.3: Product Dimensions of the Mecpow P50. This image displays the height (240 mm / 9.45 inch) and width (148 mm / 5.83 inch front, 128 mm / 5.04 inch side) of the fume extractor unit.
4. Тохиргоо
- Савлах: Сав баглаа боодолоос бүх эд ангиудыг болгоомжтой авч хая. Сав баглаа боодлын жагсаалтад жагсаасан бүх эд анги байгаа эсэхийг шалгана уу.
- Шүүлтүүр суурилуулах:
- Open the top cover of the fume extractor.
- Insert the activated carbon filter at the bottom, followed by the medium HEPA filter, and finally the pre-filter on top. Ensure they are seated correctly.
- Дээд талын тагийг сайтар хаа.
- Хоолойн холболт: Attach one end of the flexible exhaust hose to the outlet on top of the fume extractor. Secure it firmly.
- Байршил: Position the fume extractor on a stable, flat surface near your laser engraver or soldering station. Connect the other end of the exhaust hose to the fume outlet of your laser engraver (if applicable) or position it to capture fumes effectively.
- Эрчим хүчний холболт: Connect the power cable to the fume extractor and then plug it into a suitable power outlet.
Figure 4.1: Mecpow P50 Fume Extractor set up with a laser engraver. This image demonstrates the fume extractor connected via its hose to a laser engraver, showing a typical setup for fume extraction during operation.
5. Ашиглалтын заавар
- Асаах: дээр дарна уу ON/OFF button located on the front panel to turn on the fume extractor. The indicator light will illuminate.
- Adjusting Airflow Speed:
- дээр дарна уу УРСГАЛ button to cycle through the three airflow speed levels: Low, Medium, and High.
- Select the appropriate speed based on the intensity of fumes and your working environment.
- Үйл ажиллагаа: Begin your laser engraving or soldering task. The fume extractor will continuously draw in smoke and particles, purifying the air.
- Унтраах: After completing your task, press the ON/OFF button again to turn off the fume extractor.
Figure 5.1: Control panel and airflow speed levels. This image highlights the control buttons for power and airflow, showing indicators for Low, Medium, and High speed settings.
Figure 5.2: Sealed design for effective fume containment. This image illustrates the fume extractor's sealed design, demonstrating how it prevents smoke leakage and maintains a clean workspace.
Figure 5.3: Quiet operation of the Mecpow P50. This image shows the fume extractor in a home environment, emphasizing its low noise level (under 55 dB) compared to typical traffic noise or normal conversation.
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your Mecpow P50 Fume Extractor.
6.1 Шүүлтүүрийг солих
The 3-layer filtration system requires periodic replacement to maintain 99.97% purification efficiency. The frequency of replacement depends on usage and the type of materials processed.
- Унтраах: Ensure the fume extractor is turned off and unplugged before performing any maintenance.
- Open Unit: Carefully open the top cover of the fume extractor.
- Хуучин шүүлтүүрүүдийг устгах: Remove the pre-filter, medium HEPA filter, and activated carbon filter. Dispose of used filters responsibly according to local regulations.
- Шинэ шүүлтүүр суулгах: Place new filters in the correct order: activated carbon filter at the bottom, then the medium HEPA filter, and finally the pre-filter on top. Ensure a snug fit.
- Хаах нэгж: Securely close the top cover.
Replacement filters can be purchased from authorized Mecpow retailers or the official Mecpow webсайт.
6.2 Төхөөрөмжийг цэвэрлэх
- Wipe the exterior of the fume extractor with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Ensure no liquid enters the internal components.
- Periodically check the exhaust hose for any blockages or damage. Clean if necessary.
7. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Төхөөрөмж асахгүй байна. |
|
|
| Бага сорох чадал. |
|
|
| Ашиглалтын явцад ер бусын дуу чимээ. |
|
|
8. Техникийн үзүүлэлтүүд
- Загвар: P50
- Моторын хүч: 50W (Сойзгүй)
- Агаарын урсгалын хурд: 128 м³/цаг
- Шүүлтүүрийн систем: 3-Layer (Pre-filter, Medium HEPA filter, Activated Carbon filter)
- Purification Rate: 99.97%
- Дуу чимээний түвшин: < 55 дБ
- Тохиромжтой байдал: Mecpow M1, Atomstack P1, and other laser engravers with Φ50 mm flange.
- Барааны жин: 10.01 фунт (ойролцоогоор 4.54 кг)
- Хэмжээ (ойролцоогоор): 148 мм (W) x 128 мм (D) x 240 мм (H)
9. Баталгаат хугацаа ба дэмжлэг
9.1 Баталгаат хугацааны мэдээлэл
Mecpow provides a 1-year warranty for the P50 Fume Extractor from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.
9.2 Хэрэглэгчийн дэмжлэг
For technical assistance, troubleshooting, or warranty inquiries, please contact Mecpow customer support through the official website or your retailer. Our support team is available to help you with any questions or issues you may encounter.
Visit the official Mecpow webхамгийн сүүлийн үеийн тусламжийн мэдээлэл болон холбоо барих мэдээллийг авах сайт: www.mecpow.com
