Танилцуулга
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ATK Blazing Sky F1 V2 Wireless Gaming Mouse. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
Image: The ATK Blazing Sky F1 V2 Wireless Gaming Mouse, showcasing түүний эргономик дизайн.
Тохиргоо
1. Хайрцагнаас задлах ба анхны төлбөр
Carefully remove the mouse and all accessories from the packaging. Before first use, it is recommended to fully charge the mouse.
- Connect the provided USB-C cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light will show the charging status. Refer to the LED indicator section for details.
- For F1 V2 Extreme models, fast charging requires a USB 3.0 port and the original USB data cable.
Image: Illustration of the high-density battery inside the ATK F1 V2 mouse, highlighting its capacity and fast charging capabilities.
2. Холболтын горимууд
The ATK Blazing Sky F1 V2 supports three connectivity modes: 2.4G Wireless, Bluetooth, and Wired.
2.1. 2.4G утасгүй холболт
- Locate the 8K Nano or GEM dongle included with your mouse.
- Dongle-ийг компьютер дээрээ байгаа USB порт руу холбоно уу.
- Доод талд байрлах цахилгаан унтраалгыг ашиглан хулганаа асаана уу.
- The mouse should automatically connect to the dongle. If not, press the pairing button (if available) or refer to the software for pairing instructions.
Image: The ATK F1 V2 mouse alongside its new GEM 8K dongle, illustrating the wireless connection component.
2.2. Bluetooth Connection (V2 Ultra Max)
- Таны компьютерийн Bluetooth идэвхжсэн эсэхийг шалгаарай.
- Switch the mouse to Bluetooth mode using the switch on the bottom of the mouse.
- Press and hold the Bluetooth pairing button (if applicable) until the indicator light flashes, indicating pairing mode.
- On your computer, search for Bluetooth devices and select "ATK F1 V2" to connect.
2.3. Утастай холболт
- Өгөгдсөн USB-C кабелийг хулганы урд порттой холбоно уу.
- USB-C кабелийн нөгөө үзүүрийг компьютер дээрх USB порт руу холбоно уу.
- Хулгана автоматаар утастай горимд шилжиж, цэнэглэж эхэлнэ.
3. Software Installation (ATK HUB)
For advanced customization, including DPI settings, button remapping, macro creation, and polling rate adjustments, download the ATK HUB software from the official ATK webсайт. Суулгахын тулд дэлгэцэн дээрх зааврыг дагана уу.
Ашиглалтын заавар
1. Асаах/унтраах
Use the switch on the bottom of the mouse to turn it ON or OFF. Turning the mouse off when not in use conserves battery life.
2. DPI тохируулга
The mouse features a dedicated DPI button (usually located on the top or bottom) to cycle through preset DPI levels. You can customize these levels using the ATK HUB software.
- PAW3395Ultra Sensor: 100-30,000 DPI.
- PAW3950Ultra Sensor: 10-30,000 DPI (adjustable in 10-step precision, overlockable up to 42,000 DPI).
Зураг: Ойролцоогоор view of the PAW3950 Ultra Flagship Sensor, illustrating its advanced tracking capabilities.
3. Санал хураалтын хувь
The ATK F1 V2 supports Wired/Wireless Dual 8000 Hz polling rate for instant tracking. This can be configured via the ATK HUB software.
4. Програмчлах боломжтой товчлуурууд
The mouse features multiple programmable buttons. Use the ATK HUB software to assign custom functions, macros, or shortcuts to these buttons for enhanced control.
Image: Diagram showing the ATK Self-Developed 54 Series ApexShark MAX Mouse Solution with the Nordic 54 Series MCU, highlighting its high-speed processing.
Засвар үйлчилгээ
1. Цэвэрлэгээ
The ATK F1 V2 features an All-New Nano Coating, making it sweat-resistant, stain-resistant, and easy to clean.
- Хулганы гадаргууг зөөлөн, хуурай, хөвөнгүй даавуугаар арчина.
- Зөрүүд шороонд бага зэрэг dampдаавууг усаар эсвэл зөөлөн, зүлгүүргүй цэвэрлэгчээр угаана.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the coating and internal components.
- Нарийвчлалтай хянахын тулд хулганы ёроолд байрлах оптик мэдрэгчийн хэсгийг хөвөн арчдасаар тогтмол цэвэрлээрэй.
Image: Visual representation of the All-New Nano Coating on the ATK F1 V2 mouse, emphasizing its sweat-resistant and easy-to-clean properties.
2. Зайны арчилгаа
- Батерейны ашиглалтын хугацааг хамгийн их байлгахын тулд батерейг байнга бүрэн дуусгахаас зайлсхий.
- Өгөгдсөн USB-C кабелийг ашиглан хулганаа цэнэглэнэ үү.
- Удаан хугацаагаар ашиглахгүй бол хулганыг сэрүүн, хуурай газар хадгална.
Алдааг олж засварлах
1. Хулгана хариу өгөхгүй байна
- Батерейг шалгах: Ensure the mouse is charged. Connect it via USB-C cable to check if it powers on.
- Холболтыг шалгах:
- 2.4G утасгүй: Ensure the dongle is securely plugged into a working USB port and the mouse is in 2.4G mode. Try a different USB port.
- Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is correctly paired and in Bluetooth mode. Try re-pairing.
- Утастай: USB-C кабель нь хулгана болон компьютерт аюулгүй холбогдсон эсэхийг шалгаарай.
- Эрчим хүчний мөчлөг: Turn the mouse off, wait a few seconds, then turn it back on.
- Компьютерийг дахин эхлүүлэх: Sometimes a computer restart can resolve connectivity issues.
2. Inconsistent Tracking or Cursor Lag
- Цэвэр мэдрэгч: Dust or debris on the optical sensor can cause tracking issues. Clean the sensor area on the bottom of the mouse.
- Гадаргуу: Ensure you are using the mouse on a suitable surface. Highly reflective or uneven surfaces can affect tracking. A quality mouse pad is recommended.
- хөндлөнгийн оролцоо: In wireless modes, other wireless devices might cause interference. Try moving the dongle closer to the mouse or using a USB extender.
- Санал хураалтын хувь: Ensure the polling rate is set appropriately for your system. Very high polling rates (e.g., 8K Hz) might require sufficient CPU resources.
- Програм хангамж: Check the ATK HUB software for any sensor calibration options or firmware updates.
3. Товчлуурууд хариу өгөхгүй байна
- Програм хангамжийн зөрчил: Ensure no other software is interfering with mouse button assignments.
- Тохиргоог дахин тохируулах: Use the ATK HUB software to reset button assignments to default.
- Биеийн үзлэг: Inspect buttons for any physical obstruction or damage.
Үзүүлэлтүүд
The ATK Blazing Sky F1 V2 series offers several models with varying specifications:
| Онцлог | F1 V2 Ultra Max | F1 V2 Ultimate | F1 V2 Extreme |
|---|---|---|---|
| Хэмжээ | 118.2 × 62.4 × 38.8 mm (Optimized for Small to Medium Hands) | ||
| Жин | 54 ± 2г | 39 ± 2г | 38 ± 2г |
| Мэдрэгч | PAW3395Ultra | PAW3950Ultra | PAW3950Ultra |
| MCU | Nordic 54L15 | Nordic 54L15 | Nordic 54H20 |
| Шийдэл | ATK Self-Developed Nordic 54 Series ApexShark MAX Mouse Solution | ||
| Шилжүүлэгч | ATK Lightblade Mechanical Switches | ATK Custom Optical Switches | Omron Optical Switches |
| Гүйлгэх дугуй | TTC алт | ||
| Хулганы хөл | Standard White Double-Layer Anti-Dent Mouse Feet + Bonus Set | ||
| Dongle | All-New 8K Nano Dongle | All-New GEM 8K Dongle | All-New GEM 8K Dongle |
| Холболт | 2.4G / Bluetooth / Wired | 2.4G / Wired | 2.4G / Wired |
| Санал хураалтын хувь | Wired/Wireless Dual 8K | ||
| Button Latency | 0.18 мс | 0.18 мс | 0.16 мс |
| Зайны багтаамж | 800 мАч | 300 мАч | 200mAh (Supports Fast Charging) |
| Зайны ашиглалт | 600+ цаг | 250+ цаг | 80+ цаг |
| Бүрэх | All-New Nano Coating | ||
Image: Detailed product specifications table comparing the F1 V2 Ultra Max, Ultimate, and Extreme models.
Баталгаат болон дэмжлэг
ATK products are designed for durability and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official ATK webсайт.
Хэрэглэгчийн дэмжлэг
If you encounter any issues or have questions not covered in this manual, please contact ATK customer support through their official webсайт эсвэл бүтээгдэхүүний баримт бичигт заасан холбоо барих мэдээлэл. Та мөн зочилж болно ATK Store on Amazon нэмэлт эх үүсвэр.
