1. гаруйview
The Thermalright Peerless Assassin 120 SE is a high-performance CPU air cooler designed for efficient heat dissipation. It features a dual-tower heatsink design with six heat pipes and two 120mm PWM fans, ensuring optimal cooling for various CPU platforms.
Гол онцлогууд:
- Dual-Tower Heatsink: Provides a large surface area for heat exchange.
- 6 Heat Pipes: Six 6mm heat pipes with AGHP (Anti-Gravity Heat Pipe) technology ensure efficient heat transfer regardless of mounting orientation.
- Dual 120mm PWM Fans: Two TL-C12C fans operate at up to 1550 RPM, offering a balance of airflow and low noise.
- Өргөн нийцтэй байдал: Supports Intel LGA 115X/1200/1700/17XX/1851 and AMD AM4/AM5 sockets.
- Aluminum Fins & Copper Base: Constructed with aluminum fins and a pure copper base for superior thermal conductivity.
2. Бүтээгдэхүүний техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| CPU хөргөгчийн хэмжээс (Урт x Өргөн x Өндөр) | 125мм x 135мм x 155мм (4.92"L x 5.31"W x 6.1"H) |
| Халаагч материал | Aluminum fins, Pure copper heat pipes and base, Nickel Plated |
| Дулааны хоолой | 6 x 6 мм (AGHP технологи) |
| Фен загвар | TL-C12C |
| Fan хэмжээ | 120 мм x 120 мм x 25 мм |
| Сэнсний хурд | 1550 RPM ±10% |
| Агаарын урсгалын хүчин чадал | 66.17 CFM (хамгийн их) |
| Дуу чимээний түвшин | ≤25.6 дБ(А) |
| Цахилгаан холбогч | 4-зүү PWM |
| Ботьtage | 12V DC |
| Ватtage | 265 ватт |
| Тохиромжтой залгуурууд | Intel: 115X/1200/1700/17XX/1851, AMD: AM4/AM5 |
Note: Please verify case and motherboard compatibility with the cooler's dimensions before installation.
3. Тохиргоо & Суурилуулалт
Proper installation is crucial for optimal cooling performance. Follow the steps below carefully for your specific CPU socket type.
AMD AM4/AM5 Installation:
For AMD AM4/AM5 platforms, utilize the original motherboard's built-in backplate. Remove any existing plastic brackets from around the CPU socket. Install the provided plastic standoffs and metal brackets, securing them with the appropriate screws. Apply thermal compound to the CPU IHS before mounting the heatsink.
Video: Thermalright PA120 Air Cooler series installation tutorial for AMD AM4/AM5 sockets.
Intel LGA 115X/1200/1700/17XX/1851 Installation:
For Intel LGA platforms, remove any double-sided tape from the provided backplate and adhere it to the back of the motherboard. Install the plastic standoffs and metal brackets, securing them with the appropriate screws. Apply thermal compound to the CPU IHS before mounting the heatsink.
Video: Thermalright PA120 SE Air Cooler series installation tutorial for Intel LGA sockets.
Heatsink and Fan Installation:
After preparing the CPU and mounting brackets, carefully place the heatsink onto the CPU, aligning the mounting nuts with the screws on the brackets. Tighten both screws evenly with a screwdriver until secure. Install the fan wires onto both fans and then attach the fans to the heatsink using the provided fan clips. Connect the fan Y-cable to the CPU FAN socket on your motherboard.
Image: The Thermalright Peerless Assassin 120 SE CPU Cooler fully assembled with dual fans.
Image: Detailed dimensions of the Peerless Assassin 120 SE cooler.
4. Ашиглалтын заавар
The Thermalright Peerless Assassin 120 SE CPU Cooler operates automatically via the motherboard's PWM (Pulse Width Modulation) fan control. This allows the fan speed to adjust dynamically based on CPU temperature, providing efficient cooling when needed and quieter operation during lighter loads.
- Автомат сэнсний удирдлага: Ensure the fan Y-cable is connected to the CPU_FAN header on your motherboard for automatic speed regulation.
- BIOS/UEFI тохиргоо: You can fine-tune fan curves and temperature thresholds through your motherboard's BIOS/UEFI settings for customized performance.
5. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны CPU хөргөгчийн урт наслалт, оновчтой ажиллагааг хангахад тусалдаг.
- Тоос цэвэрлэх: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fans are not spinning during cleaning.
- Дулааны нэгдэл: Reapply thermal compound to the CPU IHS every 2-3 years, or if the cooler is removed and reinstalled.
- Сэнсний үзлэг: Check fan cables for secure connections and inspect fan blades for any damage or obstructions.
6. Алдаа засах
If you encounter issues with your CPU cooler, consider the following:
- CPU-ийн өндөр температур:
- Verify proper installation and contact between the heatsink base and CPU.
- Ensure sufficient thermal compound application.
- Check fan operation and ensure they are spinning correctly.
- Компьютерийн гэр доторх агаарын урсгал хангалттай байгаа эсэхийг шалгаарай.
- Хэт их сэнсний чимээ шуугиан:
- Сэнсний ир эсвэл халаагчийн сэрвээ дээр тоосжилт үүссэн эсэхийг шалгаарай.
- Ensure fan cables are not obstructing fan rotation.
- Adjust fan curves in BIOS/UEFI settings to reduce speeds at lower temperatures.
- Фэнүүд эргэхгүй байна:
- Verify the fan Y-cable is securely connected to the CPU_FAN header on the motherboard.
- Check motherboard BIOS/UEFI settings for fan control options.
7. Баталгаат хугацаа ба дэмжлэг
Thermalright is a brand with over 20 years of experience in computer accessories. For warranty claims, technical support, or further assistance, please refer to the official Thermalright webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат баталгааг баталгаажуулахын тулд худалдан авалтын баримтаа хадгална уу.
Дэлгэрэнгүй мэдээлэл авахыг хүсвэл зочилно уу: www.thermalright.com
