CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Аюулгүй ажиллагааны чухал заавар

Энэ төхөөрөмжийг ажиллуулахаасаа өмнө бүх аюулгүй байдлын зааврыг уншиж, ойлгоно уу. Эдгээр зааврыг дагаж мөрдөөгүй тохиолдолд цахилгаанд цохиулах, гал түймэр гарах эсвэл ноцтой гэмтэл бэртэлд хүргэж болзошгүй.

• Төхөөрөмжийг үргэлж газардуулгатай залгуурт холбоно уу.
• Үндсэн төхөөрөмжийг ус болон бусад шингэнд дүрж болохгүй.
• Цэвэрлэгчийг саванд шингэнгүйгээр ажиллуулж болохгүй.
• Хүүхдийн гар хүрэхгүй газар хадгална.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Use appropriate cleaning solutions for the items being cleaned. Avoid flammable or corrosive liquids.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Бүтээгдэхүүн дууссанview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Гол онцлогууд

• 10L багтаамж: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Sweep Function: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Дегазатив горим: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Тохируулж болох хүч: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Тохируулах цаг хэмжигч: 0-30 minute timer for precise control over cleaning cycles.
• Температурын хяналт: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 зэвэрдэггүй ган хийц: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Багцын агуулга

Савлахдаа бүх зүйл байгаа, сайн нөхцөлд байгаа эсэхийг шалгаарай.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 х цахилгаан утас
• 1 x Mesh Basket
• 1 x ус зайлуулах хоолой
• 1 x Зааварчилгааны гарын авлага

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Зураг: Бүтэнview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Тохиргоо

1. Савлах: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Байршил: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Эрчим хүчний холболт: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Савыг дүүргэ: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Сагс оруулах: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Үйл ажиллагаа

Familiarize yourself with the control panel before beginning operation.

Хяналтын самбар дууссанview

Зураг: Нарийвчилсан view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Эрчим хүч солих: Төхөөрөмжийг асаах/унтраах.
• Таймерын хяналт: Adjusts the cleaning duration from 0 to 30 minutes.
• Температурын хяналт: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Цэвэрлэх журам

1. Эд зүйлсийг бэлтгэх: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Шийдэл нэмэх: Fill the tank with the appropriate cleaning solution.
3. Температурыг тохируулах (заавал биш): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Цэвэрлэж эхлэх: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Явцыг хянах: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Цэвэрлэгээг дуусгах: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Угаах, хатаах: Rinse the cleaned items thoroughly with clean water and dry them completely.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. Засвар үйлчилгээ

Зөв арчилгаа нь таны хэт авианы цэвэрлэгчийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.

• Савыг шавхах: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Танкийг цэвэрлэх: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч хэрэглэж болохгүй, эсвэл төхөөрөмжийг усанд дүрж болохгүй.
• Таг ба сагс: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• Хадгалах: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Тогтмол үзлэг: Цахилгааны утсыг үе үе шалгаж, ямар нэгэн эвдрэл гарсан эсэхийг шалгана уу. Хэрэв эвдрэл гарсан бол хэрэглэхээ зогсоож, хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Алдаа засах

Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг энэ хэсгээс харна уу. Хэрэв асуудал хэвээр байвал хэрэглэгчийн тусламжтай холбогдоно уу.

7. Техникийн үзүүлэлтүүд

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: CREWORKS Store on Amazon