AtomStack F03-0329-0AA1 Swift

Үзүүлэлтүүд

• Бүтээгдэхүүний нэр: AtomStack Swift
• Загварын дугаар: F03-0329-0AA1
• Хувилбар: B
• Эрчим хүчний оролт: DC 24V
• Портууд: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Статусын үзүүлэлт: Solid blue when working

Бүтээгдэхүүнийг ашиглах заавар

Хэсгийн жагсаалт:

• X тэнхлэгийн угсралт
• Зүүн Y тэнхлэгийн угсралт (мотортой)
• Баруун Y тэнхлэгийн угсралт
• Цахилгаан адаптер
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Хэсгийн жагсаалт

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Жич: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Жич:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Анхаарал хандуулах арга:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Зөвлөгөө:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Computer Software Download Method:
AtomStack Studio download link: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Татаж авахын тулд сканнердах

Програм хангамжийн нөөц

LightBurn
Unofficial software. Requires a separate purchase

Lightburn Software Download Method: Download link: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Open the LightBurn software, select: Devices – Import
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Жич: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Хэрэглэгчийн гарын авлага

Бидэнтэй холбоо барина уу

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Алдааг олж засварлах
• Засвар үйлчилгээ

Харилцагчийн үйлчилгээ:

• For the detailed warranty policy, please visit our official webсайт: www.atomstack.com
• Техникийн дэмжлэг, үйлчилгээ авахыг хүсвэл имэйлээр илгээнэ үү: support@atomstack.com

Үйлдвэрлэгч:
Shenzhen AtomStack Technologies Co., Ltd.

Zip код: 518172

Хаяг:
БНХАУ-ын Гуандун хот, Шенжэнь, Лонгган дүүрэг, Баохэ өргөн чөлөө, Баолон гудамж, Ухаалаг цэцэрлэгт хүрээлэнгийн 17 тоот, II шатны 3А байр, 76 давхар.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

Түгээмэл асуултууд

Суулгах явцад асуудал гарвал би яах ёстой вэ?

If you face any difficulties during installation, refer to the video tutorial available on the official webсайт эсвэл тусламж авахын тулд хэрэглэгчийн дэмжлэгтэй холбогдоно уу.

Баримт бичиг / нөөц

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Хэрэглэгчийн гарын авлага F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Лавлагаа

• Хэрэглэгчийн гарын авлага