BinTec CAPI Software System
Дууслааview
CAPI 1.1 and CAPI 2.0 info values with their appropriate error-codes associated with the capiInfoNumber field are as follows. Both CAPI 1.1 and 2.0 info values are arranged by error class.
CAPI 1.1 Info Values
Error Class 10
Formal error messages and errors during management of Message Queues.
| 0х1001 | Application registration error |
| 0х1002 | Wrong application id |
| 0х1003 | Message error |
| 0х1004 | Wrong capi command |
| 0х1005 | Message queue full |
| 0х1006 | Message queue empty |
| 0х1007 | Messages lost |
| 0х1008 | Error during deinstallation |
Error Class 20
Addressing errors.
| 0х2001 | Wrong controller |
| 0х2002 | Wrong PLCI |
| 0х2003 | Wrong NCCI |
| 0х2004 | Буруу төрөл |
Error Class 31
Incorrect parameters.
| 0х3101 | B-channel incorrectly coded |
| 0х3102 | Info mask incorrectly coded |
| 0х3103 | Service SI mask incorrectly coded |
| 0х3104 | Service EAZ mask incorrectly coded |
| 0х3105 | B2 protocol incorrect |
| 0х3106 | Dlpd incorrect |
| 0х3107 | B3 protocol incorrect |
| 0х3108 | NCPD incorrect |
| 0х3109 | NCPI incorrect |
| 0х310а | Flags incorrectly coded |
Error Class 32
Unsupported parameters.
| 0х3201 | Хянагчийн алдаа |
| 0х3202 | Conflict between registrations |
| 0х3203 | Function is not supported |
| 0х3204 | PLCI not active |
| 0х3205 | NCCI not active |
| 0х3206 | B2 protocol not supported |
| 0х3207 | Change of B2 protocol not possible in this state |
| 0х3208 | B3 protocol not supported |
| 0х3209 | Change of B3 protocol not possible in this state |
| 0х320а | Parameters used not supported in DLPD |
| 0x320b | Parameters used not supported in NCPD |
| 0x320c хэмжээтэй | Parameters used not supported in NCPI |
| 0x320d | Data length not supported |
| 0x320e | DTMF number unknown |
Error Class 33
Network errors.
| 0х3301 | Error on setup of D-channel layer 1 |
| 0х3302 | Error on setup of D-channel layer 2 |
| 0х3303 | Error on setup of B-channel layer 1 |
| 0х3304 | Error on setup of B-channel layer 2 |
| 0х3305 | Abort D-channel layer 1 |
| 0х3306 | Abort D-channel layer 2 |
| 0х3307 | Abort D-channel layer 3 |
| 0х3308 | Abort B-channel layer 1 |
| 0х3309 | Abort B-channel layer 2 |
| 0х330а | Abort B-channel layer 3 |
| 0x330b | Re-establish B-channel layer 2 |
| 0x330c хэмжээтэй | Re-establish B-channel layer 3 |
Error Class 34
Network messages (whereby xx refers to the related 1TR6 Error-Cause).
| 0х3400 | Normal call clearing |
| 0х3480 | Normal call clearing |
| 0х3481 | Invalid call reference value |
| 0х3483 | Bearer service not implemented |
| 0х3487 | Call identity does not exist |
| 0х3488 | Call identity in use |
| 0х348а | No channel available |
| 0х3490 | Requested facility not implemented |
| 0х3491 | Requested facility not subscribed |
| 0x34a0 | Outgoing calls barred |
| 0x34a1 | Хэрэглэгч завгүй |
| 0x34a2 | Negative GBG Comparison |
| 0x34a5 | As SPV not aloud |
| 0x34b0 | Reverse charging not allowed at origination |
| 0x34b1 | Reverse charging not allowed at destination |
| 0x34b2 | Reverse charging rejected |
| 0x34b5 | Destination not obtainable |
| 0x34b8 | Number changed |
| 0x34b9 | Захиалга дууссан |
| 0x34ba | User not responding |
| 0x34bb | User access busy |
| 0x34bd | Incoming calls barred |
| 0x34be | Дуудлагаас татгалзсан |
| 0x34d9 | Сүлжээний түгжрэл |
| 0x34da | Remote user initiated |
| 0x34f0 | Local procedure error |
| 0x34f1 | Remote procedure error |
| 0x34f2 | Remote user suspended |
| 0x34f3 | Remote user resumed |
| 0x34ff | User info discarded locally |
Error Class 40
FAX-G3 Errors.
| 0х4001 | Remote station is not a fax G3 machine |
| 0х4002 | Local fax module busy |
| 0х4003 | Disconnected during transfer (remote abort) |
| 0х4004 | Disconnected before transfer (training error) |
| 0х4005 | Disconnected during transfer (local tx data underrun) |
| 0х4006 | Fax module temporary disabled |
| 0х4007 | Local disconnect (local abort) |
| 0х4008 | Disconnect during transfer (remote procedure error) |
| 0х4009 | Remote disconnect (remote abort) |
| 0х400а | Line Disconnect during transfer |
| 0x400b | Disconnect before transfer |
| 0x400c хэмжээтэй | Local Disconnect (SFF coding error) |
CAPI 2.0 Info Values
Error Class 00
Informative values (corresponding message was processed).
| 0х0001 | NCPI not supported by current protocol, NCPI ignored |
| 0х0002 | Flags not supported by current protocol, flags ignored |
| 0х0003 | Alert already sent by another application |
Error Class 10
Error information concerning CAPI_REGISTER.
| 0х1001 | Хэт олон програм |
| 0х1002 | Logical block size too small, must be at least 128 bytes |
| 0х1003 | Buffer exceeds 64 kByte |
| 0х1004 | Message buffer size too small, must be at least 1024 byte |
| 0х1005 | Max. number of logical connections not supported |
| 0х1006 | Захиалагдсан |
| 0х1007 | The message could not be accepted because of an internal busy condition |
| 0х1008 | OS Resource error (e.g. no memory) |
| 0х1009 | COMMON-ISDN-API not installed |
| 0х100а | Controller does not support external equipment |
| 0x100b | Controller does only support external equipment |
Error Class 11
Error information concerning message exchange functions.
| 0х1101 | Illegal application number |
| 0х1102 | Illegal command or subcommand or message length less than 12 octets |
| 0х1103 | The message could not be accepted because of a queue full condition |
| 0х1104 | Queue is empty |
| 0х1105 | Queue overflow, a message was lost |
| 0х1106 | Unknown notification parameter |
| 0х1107 | The message could not be accepted because of an internal busy condition |
| 0х1108 | OS resource error (e.g. no memory) |
| 0х1109 | COMMON-ISDN-API not installed |
| 0х110а | Controller does not support external equipment |
| 0x110b | Controller does only support external equipment |
Error Class 20
Error information concerning resource/coding problems.
| 0х2001 | Message not supported in current state |
| 0х2002 | Illegal Controller/PLCI/NCCI |
| 0х2003 | Out of PLCI |
| 0х2004 | Out of NCCI |
| 0х2005 | Out of LISTEN |
| 0х2006 | Out of FAX resources (protocol T.30) |
| 0х2007 | Illegal Message parameter coding |
Error Class 30
Error information concerning requested services.
| 0х3001 | B1 protocol not supported |
| 0х3002 | B2 protocol not supported |
| 0х3003 | B3 protocol not supported |
| 0х3004 | B1 protocol parameter not supported |
| 0х3005 | B2 protocol parameter not supported |
| 0х3006 | B3 protocol parameter not supported |
| 0х3007 | B protocol combination not supported |
| 0х3008 | NCPI not supported |
| 0х3009 | CIP Value unknown |
| 0х300а | Flags not supported (reserved bits) |
| 0x300b | Facility not supported |
| 0x300c хэмжээтэй | Data length not supported by correct protocol |
| 0x300d | Reset procedure not supported by current protocol |
Error Class 33
Protocol error reasons.
- 0x3301 Protocol error layer 1 (broken line or B-channel removed by signaling protocol)
- 0x3302 Protocol error layer 2
- 0x3303 Protocol error layer 3
- 0x3304 Another application got that call
- 0x3311 Connecting not successful (remote station is no FAX G3 machine)
- 0x3312 Connecting not successful (training error)
- 0x3313 Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)
- 0x3314 Disconnected during transfer (remote abort)
- 0x3315 Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)
- 0x3316 Disconnected during transfer (local tx data underrun)
- 0x3317 Disconnected during transfer (local rx data overflow)
- 0x3318 Disconnected during transfer (local abort)
- 0x3319 Illegal parameter coding (e.g. SFF coding error)
Error Class 34
Disconnect cause from the network according to ETS 300102-1/Q.931. In the field ‘xx’ the cause value received within a cause information element (octet 4) from the network is indicated.
- 0x3481 Unallocated (unassigned) number
- 0x3482 No route to specified transit network
- 0x3483 No route to destination
- 0x3486 Channel unacceptable
- 0x3487 Call awarded and being delivered in an established channel
- 0x3490 Normal call clearing
- 0x3491 User busy
- 0x3492 No user responding
- 0x3493 No answer from user (user alerted)
- 0x3495 Call rejected
- 0x3496 Number changed
- 0x349a Non-selected user clearing
- 0x349b Destination out of order
- 0x349c Invalid number format
- 0x349d Facility rejected
- 0x349e Response to STATUS ENQUIRY
- 0x349f Normal, unspecified
- 0x34a2 No circuit / channel available
- 0x34a6 Network out of order
- 0x34a9 Temporary failure
- 0x34aa Switching equipment congestion
- 0x34ab Access information discarded
- 0x34ac Requested circuit / channel not available
- 0x34af Resources unavailable, unspecified
- 0x34b1 Quality of service unavailable
- 0x34b2 Requested facility not subscribed
- 0x34b9 Bearer capability not authorized
- 0x34ba Bearer capability not presently available
- 0x34bf Service or option not available, unspecified
- 0x34c1 Bearer capability not implemented
- 0x34c2 Channel type not implemented
- 0x34c5 Requested facility not implemented
- 0x34c6 Only restricted digital information bearer capability is available
- 0x34cf Service or option not implemented, unspecified
- 0x34d1 Invalid call reference value
- 0x34d2 Identified channel does not exist
- 0x34d3 A suspended call exists, but this call identity does not
- 0x34d4 Call identity in use
- 0x34d5 No call suspended
- 0x34d6 Call having the requested call identity has been cleared
- 0x34d8 Incompatible destination
- 0x34db Invalid transit network selection
- 0x34df Invalid message, unspecified
- 0x34e0 Mandatory information element is missing
- 0x34e1 Message type non-existent or not implemented
- 0x34e2 Message not compatible with call state or message type non-existent or not implemented
- 0x34e3 Information element non-existent or not implemented
- 0x34e4 Invalid information element contents
- 0x34e5 Message not compatible with call state
- 0x34e6 Recovery on timer expiry
- 0x34ef Protocol error, unspecified
- 0x34ff Interworking, unspecified
Баримт бичиг / нөөц
 | CAPI Software System |
Лавлагаа
- Хэрэглэгчийн гарын авлагаmanual.tools
Published: June 9, 2026
Шинэчлэгдсэн: 11 оны 2026-р сарын XNUMX