AVPro Edge specializes in professional-grade audio and video distribution equipment, including matrix switches, HDBaseT extenders, and video wall processors.
AVPro Edge, a brand under AVPro Global, is a premier manufacturer of cutting-edge audio and video distribution equipment designed for both commercial and residential integration. With a strict focus on uncompressed signal integrity and high-bandwidth transmission, the brand empowers integrators with robust A/V solutions. Their expansive product lineup includes 8K HDMI matrix switches, FRL HDMI 2.1 distribution amplifiers, HDBaseT extenders, automatic-sensing wall plates, and dedicated video wall processors.
AVPro Edge builds its products to military-grade standards, ensuring stability for long-term use in high-demand environments like corporate boardrooms, sports bars, retail centers, and luxury home theaters. Many AVPro Edge devices incorporate Invisible Compression Technology (ICT) and intelligent EDID management, making seamless integration possible across legacy and bleeding-edge A/V systems.
Хамгийн сүүлийн үеийн гарын авлагууд manuals+ энэ брэндэд зориулан бэлтгэсэн.
Энэ брэндийн тохиргоо, суурилуулалт, алдааг олж засварлах видеог үзээрэй.
Энэ брэндийн гарын авлага, бүртгэл, дэмжлэгийн талаархи нийтлэг асуултууд.
Access the unit's WebUI by connecting it to your local network and typing its IP address into a browser. Navigate to the System section, select 'Update Firmware', and follow the prompts to download and apply the firmware file over the air (OTA).
A flashing blue HDMI signal indicator means the unit is struggling to maintain a sync. Try plugging the source directly into the display to verify functionality, use a higher-quality or shorter HDMI cable, or adjust EDID settings. You can also enable the built-in test pattern on the transmitter to isolate the issue.
Press the ENTER button on the front panel to access the Main Menu. Once in the EDID menu, use the UP or DOWN buttons to cycle through available EDID profiles. When your preferred resolution and audio capability appear, press ENTER to apply and save the setting.
If you are pairing the wall plate transmitter with a PoE-enabled HDBaseT receiver (such as the AC-EX100-UHD-R3), local power is not required. However, if connecting to a non-PoE device, you will need to utilize a local 5V mini-USB power supply.