COOLO Zigbee Occupancy Sensor User Manual

Mini Human Presence / Occupancy Sensor (Zigbee 3.0)

Хэрэглэгчийн гарын авлагын хувилбар: V1.0

Product Information & Disclaimer

Please read this manual carefully before using the product. Thank you for purchasing and using this product. To avoid damage to the equipment, please follow all instructions and use the product correctly. The company will not bear any responsibility for consequences caused by improper or abnormal operation.

Note: The illustrations in this manual are for reference and instructional purposes only. Please refer to the actual product for exact details.

Бүтээгдэхүүн дууссанview

• Статусын үзүүлэлт
• Radar induction antenna / sensor surface
• Reset / pairing button

1. Сүлжээний тохиргоо

Төхөөрөмжийг асааж байна

1. Align the provided opening tool with the battery compartment slot.
2. Rotate the battery cover anticlockwise to open and power on.

Хослуулах заавар

1. -г удаан дар RESET button for 3 seconds, then release it.
2. The red LED indicator will flash, indicating the sensor has entered network configuration mode.

Жич: This device must be connected to a Zigbee gateway to successfully pair, communicate, and upload data to the server or mobile app.

2. Суурилуулах заавар

Байршлыг сонгох

• Install the sensor in areas where presence or movement needs to be monitored.
• The recommended installation height is 2.5м-ээс 3.5м хүртэл above the ground (or 1.5m to 3.0m depending on environment) for optimal coverage.

Төхөөрөмжийг суурилуулах

1. Peel off the protective film from the adhesive pad on the base of the device.
2. Firmly stick the device in your chosen location.

3. Урьдчилан сэргийлэх арга хэмжээ

• Pet Adjustment: If you have pets or other small animals at home, please install the device on the side at a lower height of 1.0м-ээс 1.5м хүртэл to prevent false alarms.
• Талбарыг арилгах View: Ensure there are no obstacles directly in front of the radar induction area, as this may degrade or block detection.
• Дохионы хүрээ: Avoid building obstacles (such as thick concrete walls) between the sensor and the Zigbee gateway, as they can significantly reduce wireless transmission range.
• Хөндлөнгийн эх үүсвэрүүд: Avoid mounting the device near moving objects such as air conditioners, electric fans, waving curtains, or other vibrating objects to prevent false triggers.

4. Бүтээгдэхүүний техникийн үзүүлэлтүүд

5. Radar Version Sensitivity Settings

• Radar Configuration Options:
  • The 24GHz radar version supports both static presence detection and motion detection.
  • The 10GHz radar version supports motion detection only.
• 10GHz Version Settings: The factory default sensitivity is set to 12x. A larger setting value offers a longer detection distance.
• 24GHz Version Settings: This version features configurable motion and static presence sensitivity. Larger setting values increase sensitivity.
  • If the default settings cause false triggers, please decrease the motion detection sensitivity.
  • If the sensor fails to maintain a static presence state, increase the static detection sensitivity болон тохируулна уу Presence Keep Time to a longer duration.