GRID BROWS LED Brows
ЭХЛЭХИЙН ӨМНӨ
Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).
Хөмсөг
Онцлогууд
- CFRP enclosures
- 2x 9 RGB LEDs
- RaceDirector compatible
Carbon fiber mounting brackets
Mounting the brows
To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). 
Энэ жишээндample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.
Connecting the brows
As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box. 
Уралдааны захирал
- Download and install the lastest version of RaceDirector from www.sim-lab.eu/srd-setup
- For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
- Бид одоо RaceDirector-ийг ашиглан таныг хурдан замд оруулах үндсэн зарчмуудыг авч үзэх болно. RaceDirector-ийн санал болгож буй боломжуудын талаар илүү дэлгэрэнгүй тайлбарлахын тулд гарын авлагыг уншихыг бид үнэхээр уриалж байна.
- Эхлээд бид бүтээгдэхүүнийг идэвхжүүлэх хэрэгтэй, үүнийг "Тохиргоо" (1) хуудсан дээр хийнэ.
- Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.
Төхөөрөмжийн хуудас
These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.
LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. 
The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.
FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.
RaceDirector програм хангамжийн одоогийн хувилбаруудыг хөтөлдөг. Энэ нь ялгааг илрүүлэх үед мэдэгдэл 
Сүүлийн үеийн программ хангамж илэрсэн талаар танд мэдэгдэх болно. 
Шинэчлэгдсэн програм хангамжийн хувилбар илэрсэн үед зааврыг дагаж, 'Шинэчлэлтийг гүйцэтгэх' (1) товчийг дарна уу.
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.
Хуучин төхөөрөмжүүдэд хуучин програм хангамжийн шинэчлэлтийн хэрэгсэл шаардлагатай хэвээр байж магадгүй. Энэ тохиолдолд RaceDirector танд юу хийхээ хэлэх болно.
Simhub дэмжлэг
For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. 
LED-ийн функцийг өөрчлөх.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. 
Өгөгдсөн өгөгдмөл LED pro-д хангалттай мэдээлэл байх ёстойfileLED тохиргоог өөрийн хүссэнээр тохируулах боломжтой. Өөрийнхөө мэргэжилтэнг бүтээж эхлэхийн тулдfile, бид байгаа нэгийг хуулж, шаардлагатай бол өөрчлөхийг санал болгож байна. Адванtage нь та үргэлж анхдагч мэргэжлийн програмын нөөцтэй байдагfile буцаж унах.
Тайлбар: Simhub pro-ийн асуудал/алдааг олж засварлахfiles, Simhub баримт бичиг эсвэл Simhub дэмжлэгийг үзнэ үү.
Материалын хуудас
| ХАЙРЦАНД | |||
| # | Хэсэг | Тоо хэмжээ | Анхаарна уу |
| A1 | Хасах | 2 | |
| A2 | Хяналтын хайрцаг | 1 | Interface to PC. |
| A3 | Хаалт суурилуулах | 2 | |
| A4 | USB-A кабель | 1 | |
| A5 | Brow cable long | 1 | Use between brows. |
| A6 | Brow cable short | 1 | |
| A7 | Боолт M5 X 14 DIN 7380 | 2 | |
| A8 | Боолт M5 X 8 DIN 7380 | 4 | |
| A9 | Самар M5 | 4 | |
Дэлгэрэнгүй мэдээлэл
Хэрэв танд энэ бүтээгдэхүүнийг угсрах эсвэл гарын авлагын талаар асуулт байгаа бол манай тусламжийн хэлтэст хандана уу. Тэдэнтэй холбогдож болно: support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord
Баримт бичиг / нөөц
 |
GRID BROWS LED Brows [pdf] Зааварчилгааны гарын авлага VERSION 1.3, BROWS LED Brows, BROWS, LED Brows, Brows |