Агуулга
нуугдах
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module
Үзүүлэлтүүд
- Бүтээгдэхүүн: ESP32 Development Board
- Үйлдвэрлэгч: Espressif
- Тохиромжтой байдал: Arduino IDE
- Webсайт: https://www.arduino.cc/en/Main/Software
Бүтээгдэхүүнийг ашиглах заавар
Download Software and Development Board
- Arduino IDE програмыг албан ёсны сайтаас татаж авна уу webдээр дурдсан сайт.
- Open the Arduino IDE software to start the setup process.
Add ESP32 Development Environment
- In Arduino IDE, go to File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Сонго File -> Жишээ ньample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Татгалзах болон зохиогчийн эрхийн мэдэгдэл
Энэхүү баримт бичгийн мэдээлэл, үүнд URL лавлагааны хаягийг мэдэгдэлгүйгээр өөрчлөх боломжтой. Баримт бичгийг аливаа санал, техникийн тодорхойлолт эсвэл бусад газарт дурдагдсан худалдах, тодорхой зорилгод нийцэх, зөрчихгүй байх баталгаа зэрэг ямар ч баталгаагүйгээр "байгаагаар нь" өгдөг.ample. Энэхүү баримт бичигт ямар ч хариуцлага хүлээхгүй, үүнд энэ баримт бичигт байгаа мэдээллийг ашигласнаас үүсэх патентын эрхийг зөрчсөн аливаа хариуцлага хүлээхгүй. Энэхүү баримт бичиг нь оюуны өмчийн эрхийг ашиглахыг хориглох болон бусад хэлбэрээр шууд болон далд хэлбэрээр олгохгүй.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Анхаарна уу
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Дууслааview
Бүтээгдэхүүний танилцуулга
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Параметрүүд
Бүрэлдэхүүн хэсгүүдийн танилцуулга
Components and interfaces
Жич: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Зүү тодорхойлолт
Дараах эерэг дүрслэл нь ESP32-C3-MINI-1-TB-ийг хуучин загвар болгон харуулж байнаampле:
Тэмдэглэл
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Функцийн танилцуулга
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Хөтөлбөрийг шатаах гарын авлага
- Асаахаас өмнө ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB бүрэн бүтэн эсэхийг шалгана уу.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Хяналтын түүх
Байнга асуудаг асуултууд
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Баримт бичиг / нөөц
 |
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module [pdf] Хэрэглэгчийн гарын авлага ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module, ESP32 C3, Development Board Modules Mini Wifi BT Bluetooth Module, Board Modules Mini Wifi BT Bluetooth Module, Wifi BT Bluetooth Module, BT Bluetooth Module, Bluetooth Module |