LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Техникийн параметрүүд

Загвар	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Өнгө	Цагаан	Хар	Цагаан	Хар	Цагаан	Хар	Цагаан	Хар
Бүдэгрүүлэх төрөл	DIM		CT		RGB/ RGBW		RGBCW
Утасгүй төрөл	RF 2.4 GHz
Ажлын ботьtage	3Vdc (Button battery CR2032×1)
Зогсоолын гүйдэл	＜ 2uA
Distance of the remote	30M (Under unobstructed conditions)
Ажлын температур.	-25℃~50℃
Жин	40г±10г
Хэмжээ	104×58×9mm (remote)，108×63×14mm (remote+hold)

Хэмжээ

Бүтээгдэхүүн суурилуулах

Two ways to fix the remote holder :

1. Алсын бариулыг хоёр боолтоор хананд бэхлээрэй.
2. Алсын тогтоогчийг 3М цавуугаар хананд бэхлэнэ.
   • Жич: Эхлээд ашиглахаасаа өмнө батерейны хавтсыг сугалж авна уу

Зай солих

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Товчлуурын функцууд

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Өнгө	R/G/B values
Улаан	R100% G0% B0%
Шар	R100% G100% B0%
Ногоон	R0% G100% B0%
Цэнхэр	R0% G100% B100%
Цэнхэр	R0% G0% B100%
Нил ягаан	R100% G0% B100%
Цагаан	R100% G100% B100%

Динамик горим	Red-purple gradient	Статик горим	Улаан
	Blue-purple gradient
			Ногоон
	Color temperature gradient (warm yellow, cool white)
			Цэнхэр
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Шар
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Нил ягаан
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			Цэнхэр
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Код хослох

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Жич: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Кодыг цэвэрлэх

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Кодыг цэвэрлэх
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Заагч гэрлийн төлөв

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.
  • Жич: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Тээвэрлэлт ба хадгалалт

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Анхаар

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Энэхүү гарын авлагыг нэмэлт мэдэгдэлгүйгээр өөрчлөх боломжтой. Бүтээгдэхүүний үйл ажиллагаа нь бараанаас хамаарна. Хэрэв танд асуулт байвал манай албан ёсны дистрибьютерүүдтэй холбоо барина уу.

Баталгааны гэрээ

• Хүргэлтийн огнооноос хойшхи баталгаат хугацаа: 5 жил
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• The following conditions are not within the guarantee range of free repairing or replacement services:

Beyond warranty periods:

• Их хэмжээний эзэлхүүнээс үүдэлтэй аливаа зохиомол гэмтэлtage. overload. or improper operations; Products with severe physical damage:
• Байгалийн гамшиг, давагдашгүй хүчин зүйлийн улмаас учирсан хохирол;
• Баталгаат шошго болон бар код гэмтсэн.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

АНХААРУУЛГА

• ЗАЛГАХ АЮУЛ: Энэ бүтээгдэхүүн нь товчлуур эсвэл зоосны зайтай.
• Хэрэв залгисан бол ҮХЭЛ эсвэл ноцтой гэмтэл авч болно.
• Залгисан товчлуур эсвэл зоосны зай нь 2 цагийн дотор химийн түлэгдэлт үүсгэдэг.
• Шинэ болон хуучин батерейг ХҮҮХДИЙН ХАМГААЛАХГҮЙ БАЙНА
• Батерейг залгисан эсвэл биеийн аль нэг хэсэгт оруулсан гэж сэжиглэж байвал яаралтай эмнэлгийн тусламж авах.
  • a) Ашигласан батерейг орон нутгийн дүрэм журмын дагуу авч, нэн даруй дахин боловсруулж, устгаж, хүүхдээс хол байлга. Батерейг ахуйн хогийн саванд бүү хая, шатаа.
  • б) Ашигласан батерей ч гэсэн хүнд гэмтэл, үхэлд хүргэж болзошгүй.
  • в) Эмчилгээний мэдээлэл авахын тулд орон нутгийн хордлогын хяналтын төв рүү залгана уу.
  • d) The compatible battery type: CR2032.
  • e) Зайны нэрлэсэн хэмжээtage: 3Vdc.
  • f) Цэнэглэдэггүй батерейг дахин цэнэглэж болохгүй.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Батерейг туйлшралын дагуу (+ ба -) зөв суурилуулсан эсэхийг шалгаарай.
  • i) Хуучин болон шинэ батерей, өөр өөр брэнд эсвэл төрлийн батерейг, тухайлбал шүлтлэг, нүүрстөрөгчийн цайр, цэнэглэдэг батерейг хольж болохгүй.
  • j) Орон нутгийн дүрэм журмын дагуу удаан хугацаагаар ашиглаагүй тоног төхөөрөмжөөс батарейг авч, нэн даруй дахин боловсруулж, устгана.
  • k) Зайны тасалгааг үргэлж бүрэн хамгаалаарай. Хэрэв зайны тасалгаа найдвартай хаагдахгүй бол бүтээгдэхүүнийг ашиглахаа больж, батарейг авч, хүүхдээс хол байлга.

Баримт бичиг / нөөц

LTECH LED Controller (Single-zone) [pdf] Хэрэглэгчийн гарын авлага M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Лавлагаа

• Хэрэглэгчийн гарын авлага