ZIGBEE Motion Sensor Night Light User Manual

ZIGBEE Motion Sensor Night Light

Үзүүлэлтүүд

• Бүтээгдэхүүний төрөл: PIR Sensor Night Light
• Мэдрэгчийн төрөл: Идэвхгүй хэт улаан туяа (PIR)
• Эрчим хүчний эх үүсвэр: (Please refer to product packaging for specific power source, e.g., AAA batteries, USB rechargeable)
• Гэрлийн эх үүсвэр: LED
• Илрүүлэх өнцөг: (Typically 100-120 degrees, refer to packaging)
• Илрүүлэх зай: (Typically 3-5 meters, refer to packaging)
• Үйлдлийн горимууд: (e.g., ON, OFF, AUTO/Sensor Mode)
• Материал: (e.g., ABS Plastic)
• Хэмжээ: (Refer to product packaging)
• Жин: (Refer to product packaging)

Бүтээгдэхүүний тодорхойлолт

• Package information:1set included:
• 1х лamp, 1x USB cable,
• 1 metal plate with adhesive Lighting mode:
• When switch is on “White” position, it says the lamp is on motion sensor mode When motion is detected at night, the lamp will turn on automatically,and the light is white.
• When switch is on “Warm” position, it says the lamp is on motion sensor mode when motion is detected at night, the lamp will turn on automatically,and the light is warm.
• When switch is on “OFF” position, meaning the lamp унтраалттай байна.

1. The human body sensing range is 120° horizontally, and the sensing effect is related to environmental temperature, body shape, and moving speed.
2. Please charge it before using it for the first time.
3. The surface of the product should not be covered by any other items. When cleaning the surface of the product, a soft cotton cloth should be used for wiping,
   Do not use corrosive cleaning agents for cleaning.
4. Avoid installing near heat sources, such as air conditioning vents, heating vents, humidifiers, and other sources of temperature fluctuations
   The location should be chosen carefully to avoid direct exposure to strong light or a humid environment.
5. If the brightness decreases or the working status is abnormal after normal use for a period of time, please charge it.
6. The red indicator light illuminates during charging, and it goes out when fully charged.

Аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээ:

• Failure to operate according to the instructions may pose a danger.
• Illegal operations may damage your items and even endanger your life. Any losses caused by improper operations will not be covered by the manufacturer
• We will not bear any responsibility.
• Please do not disassemble this product without authorization.
• This is not a toy. To avoid danger, keep it away from infants and children.

Гэрэлтүүлгийн горим:

1. When switch is on “AUTO” position, it says the lamp is on motion sensor mode. When motion is detected at night, the lamp автоматаар асах болно.
2. When switch is on “OFF” position, meaning the lamp унтраалттай байна.
3. You can also set it to steady on mode by moving the button to “ON” position.

Алдааг олж засварлах

• Гэрэл асахгүй байна:
  • Эрчим хүчийг шалгах: Ensure batteries are correctly inserted and not depleted, or that the device is charged.
  • Шалгах горим: Make sure the switch is set to ‘AUTO’ or ‘ON’, not ‘OFF’.
  • Орчны гэрэл: In ‘AUTO’ mode, the light will only activate in dark conditions. Test in a dark room.
  • Мэдрэгчийн бөглөрөл: Ensure the PIR sensor is not blocked.
  • Хөдөлгөөний хүрээ: Move closer to the sensor to ensure you are within its detection range.
• Light stays on continuously in ‘AUTO’ mode:
  • Тогтмол хөдөлгөөн: Ensure there isn’t continuous motion within the sensor’s range (e.g., a pet, fan, or curtain moving).
  • Мэдрэгчийн эвдрэл: If no motion is present, try turning the device off and on again. If the issue persists, the sensor might be faulty.
• Light turns on too frequently or not frequently enough:
  • Байршил: Adjust the placement of the night light. Avoid placing it near heat sources (which can trigger PIR sensors) or in direct sunlight.
  • Мэдрэгчийн мэдрэмж: Some models may have adjustable sensitivity. Refer to your product’s specific features.
• Гэрэл бүдэг байна:
  • Батерей бага: Replace batteries or recharge the device.
  • Тоос/шороо: Clean the light surface.