1. Танилцуулга
Thank you for choosing the Arregui Activa Electronic Surface-Mounted Safe. This manual provides essential information for the correct installation, operation, and maintenance of your safe. Please read these instructions carefully before using the product to ensure optimal performance and security.
The Arregui Activa safe is designed to provide secure storage for your valuables, featuring an electronic locking system and a robust construction for surface mounting.
2. Тохиргоо
2.1 Савлах
- Сейфийг савлагаанаас нь болгоомжтой салга.
- Check that all components are present: safe unit, emergency keys, instruction manual, and mounting hardware.
- Сав баглаа боодлыг ирээдүйд тээвэрлэх эсвэл хадгалахад зориулж хадгална уу.
2.2 Батерей суурилуулах
- Батерейны тасалгааг, ихэвчлэн сейфний хаалганы дотор талд байрлуул.
- Зайны тагийг нээ.
- Insert four (4) AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
- Close the battery cover securely. The safe will emit a beep, indicating successful battery installation.
2.3 Сейфийг суурилуулах
The Arregui Activa safe is designed for surface mounting to a wall or floor. Choose a secure and discreet location.
- Position the safe in the desired location and mark the drilling points through the pre-drilled holes in the back or bottom of the safe.
- Drill holes in the wall or floor using an appropriate drill bit for the mounting surface.
- Insert the provided wall anchors (if applicable) into the drilled holes.
- Align the safe with the holes and secure it using the provided screws or bolts. Tighten all fasteners firmly.
Image 1: Arregui Activa Electronic Safe, illustrating its compact design suitable for surface mounting.
3. Ашиглалтын заавар
3.1 Анхны кодын тохиргоо
Upon first use, you will need to set your personal access code.
- With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). The yellow indicator light on the keypad will illuminate.
- Enter a new personal code (3-8 digits) on the keypad.
- Confirm the code by pressing the 'A' or '#' button. The safe will beep, and the yellow light will turn off, indicating the code has been successfully set.
- Хаалгыг хаахаасаа өмнө шинэ кодыг нээлттэй байхад нь шалгана уу.
3.2 Сейфийг нээх
- Хувийн кодоо товчлуур дээр оруулна уу.
- Press the 'A' or '#' button. The green indicator light will illuminate, and you will hear a click.
- Within 5 seconds, turn the knob or handle clockwise to open the door.
3.3 Сейфийг хаах
- Сейфийн хаалгыг сайтар хаа.
- Turn the knob or handle counter-clockwise to engage the locking bolts. The safe is now secured.
3.4 Хэрэглэгчийн кодыг өөрчлөх
- Open the safe using your current code.
- Press the red reset button on the inside of the door. The yellow indicator light will illuminate.
- Enter your new personal code (3-8 digits).
- Confirm the new code by pressing the 'A' or '#' button. The safe will beep, and the yellow light will turn off.
- Хаалгыг хаахаасаа өмнө шинэ кодыг нээлттэй байхад нь шалгана уу.
3.5 Emergency Opening (with Key)
In case of battery failure or forgotten code, you can use the emergency key.
- Locate the emergency keyhole, usually hidden behind a small cover on the keypad panel.
- Бүрхүүлийг ав.
- Insert the emergency key and turn it clockwise while simultaneously turning the handle to open the safe.
- Once open, replace the batteries if necessary and reset your code. Keep emergency keys in a secure location away from the safe.
4. Засвар үйлчилгээ
4.1 Батерейг солих
When the batteries are low, the red indicator light will flash or the safe will emit a warning sound when you attempt to open it. Replace all four batteries promptly to ensure continued operation.
- Follow the steps in section 2.2 for battery installation.
- Always use new, high-quality alkaline batteries. Do not mix old and new batteries or different battery types.
4.2 Цэвэрлэгээ
- Сейфийн гадна талыг зөөлөн, гamp даавуу.
- Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
5. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сейф кодоор нээгддэггүй. | Буруу код оруулсан; Батерей бага; Товчлуурын эвдрэл. | Re-enter code carefully; Replace batteries (Section 4.1); Use emergency key (Section 3.5). |
| Товчлуур хариу өгөхгүй байна. | Батерей дууссан; Батерейны холболт суларсан. | Replace batteries (Section 4.1); Ensure batteries are correctly inserted. |
| Red light flashes or beeps continuously. | Батарей бага байгааг анхааруулж байна. | Replace batteries immediately (Section 4.1). |
| Хаалга зөв хаагдахгүй байна. | Obstruction; Misalignment. | Check for items blocking the door or bolts; Ensure safe is mounted level. |
6. Техникийн үзүүлэлтүүд
| Загварын дугаар: | 1832D80 |
| Гадаад хэмжээс (HxWxD): | 230 x 170 x 170 мм |
| Түгжих механизм: | Electronic keypad with emergency key override |
| Эрчим хүчний эх үүсвэр: | 4 х AA 1.5V батерей |
| Суурилуулах төрөл: | Surface-mounted (wall or floor) |
7. Баталгаат хугацааны мэдээлэл
Arregui products are manufactured to high-quality standards and are guaranteed against manufacturing defects for a period specified by local consumer protection laws from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
8. Дэмжлэг
For technical assistance, spare parts, or warranty inquiries, please contact your retailer or the Arregui customer service department. Refer to the contact information provided with your purchase documentation or visit the official Arregui webТусламжийн дэлгэрэнгүй мэдээллийг сайтаас авна уу.
Webсайт: www.arregui.es
